Water flow: inlet, dispensing, recirculation and drainage

In many automatic washing machines, mains pressure draws water in and a pump drains it. The valve controls the water supply; the drain pump serves a different function.

Inlet and outlet diagram

  1. The tap and hose carry water into the machine.
  2. The inlet mesh traps particles of the size it is designed to catch.
  3. The solenoid valve opens the water flow when it receives the intended command.
  4. Water may pass through the dispenser or follow another documented route to the tub.
  5. After use, the pipes carry the wash water towards the outlet, using a pump if the design includes one.
  6. The hose drains into the site’s drainage connection.

This diagram describes functions, not disassembly positions. A distributor may select different compartments or nozzles depending on the phase.

Variations that change the flow path

With a dual inlet, the control may combine cold and hot water. In recirculation, a branch returns some of the wash water to the load. In a gravity-fed semi-automatic machine, opening the outlet mechanism allows water to drain to a point positioned as specified in its manual; do not infer height requirements from a pumped system.

The level sensor tells the control system about a hydraulic condition; it is not the part that brings water in. A flow meter, where fitted, measures water flow and serves a different function.

From the diagram to the actual connections

The inlet connections must withstand the conditions of the water supply. The outlet installation must allow drainage without backflow or siphoning. Their requirements are not interchangeable, even though both use hoses.

Identify the water supply, inlet, tub and drainage before deciding which circuit a connection or component belongs to.

View all articles in How a washing machine works: systems and components