A leak-protection system protects specific points along the water route. To understand its scope, identify where it detects the problem, where it shuts off the water, and which parts are upstream or downstream of the shut-off.
Protection with different scopes
- Flow- or volume-based shut-off: it operates when the condition specified for that device is met; not every slow leak meets that condition.
- Double-wall hose: it uses an outer sheath and its own detection or containment mechanism; by definition, it does not protect every connection in the building.
- Safety solenoid valve: it can shut off an inlet when instructed to do so by the control system.
- Tray with detector: it detects water that reaches the designated base and triggers the programmed response.
A trade name may cover several components. Check the model diagram rather than assuming that every product sold under that name protects the entire home.
What lies beyond each shut-off point
A leak upstream of a valve does not stop just because a downstream point is shut off. A sensor at the base does not necessarily detect water that escapes outside the route to that base. This location explains why an accessible tap and compatible hoses and connections are needed.
Trays and external detectors add protection at the installation site, each with its own limitations. They do not replace appliance compatibility or repair existing leaks.
If the protection is activated
Keep the message and stop using the appliance as instructed. Do not tilt the machine to hide water in the tray or bypass sensors. A drain that runs continuously may be part of a protection system, and the cause needs to be identified.
Check which point the system detects and which point it shuts off; these two details define the actual scope of protection.
View all articles in Washing technologies: motors, sensors and automation
