Repairing the door handle, latch or hinge

A handle that does not operate the latch, a broken latch and a door sagging because of its hinge all require different repairs. First, regain access safely if clothing is trapped.

Identify which movement has been lost

A handle may move without operating the latch; a latch may fail to engage with its housing; a loose hinge may cause the whole door to shift. Observe the appliance with the power off, without forcing the glass or handle.

If it will not open, follow the safe clothing recovery procedure before dismantling it. The electric lock is assessed separately under the safety lock.

What to check in the parts diagram

Check whether the handle, pin, spring or hinge is supplied separately or as part of the door assembly. Do not replace a spring with another that merely looks similar: its geometry and position are part of the mechanism.

Preparation and fitting

During authorised dismantling, the door must be supported securely so its weight does not rest on the glass, seal or a single fixing. The power supply must remain isolated, and any retained water must be contained.

Fitting must restore the alignment, handle operation and latch retention without requiring extra manual pressure. Afterwards, check that the door closes and, where relevant, that there is no leak around the door.

Do not glue a retaining part in place or lever against the glass. If the drum rubs against the seal, adjusting the hinge is no substitute for diagnosing the damage.

Before resuming the wash, the door must open and close using its intended mechanism, without needing to lift or hold it to make it latch.

View all articles in Washing machine component diagnosis and repair