The seal should be assessed for replacement if it has cuts, deformation or wear that affects its ability to seal. A removable stain or dirt does not, by itself, mean the bellows is unusable.
Relate the damage to the leak
Locate the point of the leak at the door and check whether it coincides with a cut, trapped garment or rubbing. If the drum is off-centre or loose, that cause must be corrected to avoid damaging the new seal.
A mark recurring in the same place may indicate mechanical contact. Do not attribute all wear to the cleaning product without checking the position and any objects.
How bellows designs differ
Drainage points, auxiliary openings, seating profiles and clamps vary by model. Use the exploded parts diagram reference; a seal with a similar diameter may leave a channel in the wrong place.
What the replacement involves
Preparation includes disconnecting the machine, turning off the water supply, draining out any water and documenting access. On some machines, the bellows can be released through the opening; others require the front panel to be removed. Do not assume that a video of a different machine shows the correct way to access it.
Installation must follow the correct orientation and seating, with the retaining components in place, and must avoid pinching or twisting the seal. Once the protective parts have been refitted, check that the door closes, the drum turns without rubbing and the seal is watertight.
Adhesives are not a standard solution for a tear. If any edges catch clothing, the damage to fabrics should also be investigated.
A new seal will not compensate for a sagging door or a drum that rubs against it; the cause of the contact must be corrected.
View all articles in Washing machine component diagnosis and repair
