Before diagnosing a lack of heat, check whether the washing machine heats the water internally or receives hot water from the supply. Touching the glass or clothes at the end of the cycle does not tell you what temperature the wash reached.
Identify the system and programme
Check the manual to see whether the machine has an internal heater and how it regulates the temperature. On machines with two inlets, a missing hot-water supply or an incorrect connection requires a diagnosis of the hot and cold water inlets.
Check whether the programme limits the temperature or uses a different phase from the one you expected. The selected temperature and the programme label should be interpreted in line with the product documentation; the subsequent rinse may be cold.
Which signs provide the most information
- A heating-related error code identified for that model.
- A repeated interruption during a documented heating phase.
- A persistent change compared with the same programme under comparable conditions.
- A supply inlet failure when the design requires it.
Do not open the machine during a wash or insert a thermometer to take a measurement. A long programme on its own does not prove that a heating element is faulty either.
Diagnosing the internal circuit
If the machine has a heater, the inspection should distinguish between the heating element, the temperature sensor, the water level and the control signal. Continuity in one component does not confirm that the whole circuit is working.
Provide the exact programme and the condition observed, without treating the temperature you perceive at the end as a measurement of the wash.
View all articles in Electrical and heating faults in washing machines
