On the documented Maytag front-loader, F5 E2 indicates that the door lock has not engaged. A trapped item of clothing or a load pressing against the lock are the first things to check.
Check the fit with the machine stopped
The manufacturer’s documentation locates the problem at the front door lock. Pause or cancel the cycle, depending on your control panel, and wait until the door can be opened. Move any sleeves, drawstrings or hems that cross the seal out of the way. Remove some of the load if it is pressing against the door, then close it again without slamming it.
The latch may seem to have engaged but still not be recognised. Note whether you hear an attempt to lock, whether the warning appears immediately and whether the programme has started to fill with water. Do not insert anything into the lock housing to simulate the door closing.
Try again and know when to call for help
Use only the cancellation and restart sequence in the manual. If the door won’t open, there is water inside or the lock remains stuck, follow the door, lid and safety guide before trying to access the laundry.
If F5 E2 recurs when the door is unobstructed, contact a service technician. Lid warnings on HE top-load models are listed separately in the Maytag index; they cannot be resolved by applying instructions for a front-loader.
A door that needs force to close still has a problem, even if the message disappears temporarily.
View all articles in Maytag washing machine error codes and alerts
