dET indicates that a cartridge has not been detected on compatible Maytag models; F8 E2 points to the dispenser system. Identify the message before cleaning or changing the settings.
Cartridge missing or incorrectly fitted
For dET, the manufacturer’s documentation advises checking that the cartridge is inserted correctly and that the drawer is closed. First check whether you intend to use automatic dispensing or the supported manual alternative. A cartridge message does not mean you have to install one if the model allows you to use a single dose.
The system displays F8 E2
Look for detergent build-up on the drawer parts that the manual says can be removed. With the cycle stopped, clean these parts and refit them correctly. Do not insert objects into internal channels or dilute the product with mixtures not approved by the manufacturer.
If the product is still not used after cleaning, note which reservoir is affected and which programme you were using. The dispenser not dispensing troubleshooting guide distinguishes between product not being used and the incorrect amount being dispensed.
A clean drawer does not confirm that the internal system is working, just as a recognised cartridge does not prove that it is dispensing. If the message returns, contact service and provide these two details separately. Do not try to make up for a suspected fault by adding a second dose without checking the active mode.
Keep the dispenser system name and the full message to avoid following instructions for a different design.
View all articles in Maytag washing machine error codes and alerts
