On a Maytag front-load washer, F9 E1 means that draining is taking too long. On a top-load HE washer, drn indicates a drainage problem; installation and access to the filter depend on the model.
Water left in the washer and household drainage
According to the manufacturer’s documentation, a restriction in the drain path or excess suds can slow the water as it drains. Check whether the hose is kinked, whether the problem started when it was connected under a sink, and whether the household drain is also blocked. Do not infer the condition of the pump from its noise alone.
Clean only the filter intended for user access
Check the manual before opening a cover: some designs do not allow access to the pump from the outside. If there is a user-accessible filter, stop the washer and disconnect it safely, let the water cool, and prepare a container. Drain the water slowly using the specified route before removing the filter.
Refit it with no debris on the seal and check that it is closed securely before using the washer again. The guide to cleaning the drain filter explains how to prepare. An outlet height copied from another platform may make the problem worse; use the height specified for your Maytag.
If water is still left in the washer after the checks you can carry out, stop starting cycles and arrange a diagnosis. For drn, make sure to state that it is a top-load HE washer.
If detergent has built up on the laundry, do not add another full dose just because you cancelled the programme.
View all articles in Maytag washing machine error codes and alerts
