F7 E1 on the documented front-loading Maytag indicates that the speed required for the cycle has not been reached. The initial checks depend on the installation and the load.
What happened before the first warning
The manufacturer's documentation recommends checking for an overloaded drum and transport items. If the machine has just been installed, check the preparation section of the manual and make sure the specified transit restraints have been removed. Do not identify bolts by appearance or remove casing parts to test the machine.
If the problem appeared with a large load, pause the cycle, wait for the door to unlock normally and reduce the amount of washing in line with the programme. Also check that a bulky item is suitable for that cycle; the drum size is not the only limit.
Information to help diagnose the speed issue
Note whether the drum does not move at all, turns at the beginning or fails when it speeds up. These observations describe how the machine is behaving; they do not confirm that a Hall sensor, the motor or the control board is faulty.
Only try again using the option available on the control panel after checking the accessible condition. If F7 E1 appears again, request assistance. The motor speed detection guide explains the function involved without treating the code as an instruction to replace a part.
If there are severe impacts, stop using the machine and report this symptom along with the code.
View all articles in Maytag washing machine error codes and alerts
