HC warning on a Maytag washing machine: reversed water connections

On the documented Maytag HE top-loaders, HC warns that the hot and cold water supplies are connected to the opposite inlets.

Identify both connections

This meaning comes from the manufacturer’s documentation for machines with two inlets. Check the labels on the appliance and follow the hoses to each tap. Colour or left- and right-hand position is no substitute for identifying them.

If you confirm that they are reversed, stop the machine and turn off the water supply before disconnecting anything. Correct only the connections that the manual says the user may adjust and that you can reach without moving the appliance or straining the cable. Have a container ready for any residual water and keep the seals in place.

After repositioning the hoses

Turn on the taps and check the connections before carrying out the specified verification wash. If any drops appear, do not continue: correct the installation or ask for help. If an inlet is not supplying water, this is a separate check from swapping the inlets; see hot or cold water problems.

If HC persists despite the connections being correct, contact a service technician. Do not apply this interpretation to a single-inlet Maytag or another platform without confirming it in its manual.

A photo showing the routing of both hoses can help the installer check that the correction has been made properly.

View all articles in Maytag washing machine error codes and alerts