Error E20, E21 or C2 on AEG washing machines: not draining

E20, E21 and C2 on AEG machines are part of the drainage fault family; the documented models may also emit two beeps or flashes.

Start with the installation and drainage outlet

The manufacturer's documentation lists E22, E23 and E24 among the related alerts. Keep the subcode: grouping them when checking the drainage does not identify a faulty part for each one.

Check the hose route, how far it extends into the outlet and its height in relation to the diagram in the manual. If it connects beneath a sink, check for a blockage or backflow in the household drain. Check for excess foam if it is present with the retained water.

Accessible filter with controlled draining

If your PNC has a user-accessible filter, stop and safely disconnect the appliance, let the water cool and prepare a container. Drain the water using the specified method before removing the cap completely. Clean accessible debris only, then refit the cap so it is watertight.

The drain filter cleaning guide provides further preparation advice. If there is no intended access point, or water remains after checking the drainage route, request assistance. A humming noise does not prove that the flow is correct or confirm that the pump is faulty.

Do not force the door open to remove clothes while the drum still contains an unsafe level of water.

View all articles in AEG washing machine error codes and warnings