E60 and the subcodes E61, E62 and E69 cited by AEG relate to heating problems. The warning requires diagnosis if it returns after the permitted reset.
Do not confuse the selected temperature with the error displayed
The manufacturer’s documentation groups this family of errors without making it an instruction to replace the heating element. A programme that limits the temperature or adjusts its duration does not indicate a fault unless a corresponding message appears.
Make a note of the full code, programme and stage. For a washer-dryer, state whether it occurred during washing or drying; the active function helps describe the issue. Do not check the heating by touching internal parts or bypassing sensors.
A reset before requesting assistance
AEG’s guidance recommends disconnecting the appliance from the power supply for approximately one minute and then reconnecting it. Check the procedure for your PNC and only do this from a dry, safe location, with no visible electrical damage.
If the code returns, stop trying to reset it and request a service visit. Switching to a cold programme to continue using the appliance does not confirm that the fault has been resolved. The guide to electrical and heating faults helps you record related signs without diagnosing a component based on the code.
Give the exact subcode; reporting E61 or E69 simply as E60 could lose useful information.
View all articles in AEG washing machine error codes and warnings
