EF0, EFO or EF3 error in AEG washing machines: foam, leak and protection

EF0/EFO on AEG machines may be related to foam, a leak or an imbalance. In the documentation consulted, EF3 indicates leak detection: first check whether water is escaping.

Visible water: stop the test

The manufacturer's documentation distinguishes several conditions within this error family. If there is a leak, turn off the tap and stop using the machine. Disconnect it only if you can do so safely with dry hands; do not touch plugs surrounded by water.

Check whether water is coming from the drawer, seal, filter or hose. From the outside, check for clothing caught in the seal and for any connections that have recently been touched. Do not tilt the appliance to remove water from its base.

If there is no leak, check the foam and load distribution

If there is a lot of foam in the drum, check the dose, concentration and additives. Let it subside in accordance with the manual, without using home remedies. A drawer with residue may need cleaning using the user-accessible parts.

If the main issue is an imbalance, wait for the door to unlock normally and redistribute the load within the programme's capacity. Do not automatically assume EF0 means too much detergent if there are other signs.

If the warning appears again, note down the PNC and the conditions. The AEG warnings index distinguishes the related error families; a persistent leak or one that is not accessible requires a service visit.

The message disappearing does not mean it is safe to continue if water is still escaping.

View all articles in AEG washing machine error codes and warnings