The washing machine won’t drain or leaves water in the drum

If water remains in the tub, first confirm that Rinse Hold isn’t selected. If the requested drain cycle doesn’t work, check the drain path without opening a filter while it’s under water pressure.

Confirm that water is trapped

Damp laundry and accumulated water aren’t the same thing. If the tub has already drained, continue with not spinning. If water remains, check the active option and the drain instructions in the manual, provided there’s no leak, unusual smell or sign of an electrical issue.

Check what’s accessible

  • Check whether the exposed section of the hose is crushed or kinked.
  • Check whether the household drain is overflowing or draining poorly. An external blockage can also prevent draining from finishing.
  • Note whether the pump is silent, humming or seems to be running without moving water. Sound alone doesn’t confirm that the water is flowing properly.
  • If the manual indicates there’s an accessible filter, first prepare for safe draining and then clean it.

Access varies, and some models don’t have a user-accessible filter, as explained in the Whirlpool guide to drainage problems. Don’t remove panels to look for a filter that the manual doesn’t mention.

When the drain path is clear but the problem persists

The pump, its internal hoses or the control command need to be checked. Pump diagnosis helps distinguish between a blockage, mechanical failure and a power supply issue. If there’s a lot of suds, also report the detergent type and amount used.

Don’t suddenly open the door or filter cap to speed up draining; first regain control of the trapped water.

View all articles in Problems with filling, water level and draining