How to safely drain a faulty washing machine

To drain a faulty washing machine, first disconnect the power, turn off the water supply and let the contents cool. Then use only the drainage method the manual permits for users.

Prepare the area before opening anything

  1. Stop the cycle. Unplug the machine from a dry, accessible location; if there is water near any connections, don't try to reach them.
  2. Turn off the water supply and wait until the water can be drained without risk of scalding. Don't check the temperature by opening the door or filter.
  3. Check the manual for the emergency drain and prepare shallow containers, towels and room to empty them. The amount of water inside may exceed the capacity of one container.
  4. If there is an auxiliary hose, direct its outlet into the container and control the flow using the provided closure, following the manual. If the procedure uses the filter, loosen it only as directed, gradually, and without removing it all at once.
  5. Put plugs and closures back in place before using the machine again.

Whirlpool distinguishes between models with a drain hose and accessible filters in its guide to draining retained water. This access is not available on all machines.

When not to proceed

If you can't find an authorized drain, the cap is stuck, you can't contain the water, or you would have to remove panels, contact a service technician. A gravity-drain semi-automatic washer requires its own specific procedure; lowering any hose is not a universal solution.

Draining the machine won't fix the reason it won't drain. To retrieve your laundry, then check the door-opening requirements without forcing the lock.

Keep the machine disconnected until you identify the fault; removing the water does not confirm that it is safe to use again.

View all articles in Problems with filling, water level and draining