The manual dispenser drawer is cleaned along with its approved inserts and the accessible housing. Removal varies by model: not all drawers come out completely, and not all parts are dishwasher-safe.
Identify the drawer and removable parts
Check the manual for the release catch and compartments. The fabric softener insert or siphon may have a specific position; note how it is assembled before removing it. If there are automatic dispensers connected to circuits, use their specific procedure.
Whirlpool warns in its cleaning guide that complete removal and dishwasher compatibility vary between dispensers. Don’t try to overcome resistance by pulling harder; that’s part of the preparation.
Remove the parts without deforming the plastic
- With the machine stopped and disconnected from power for manual work, remove the drawer using its release mechanism.
- Remove only the inserts identified as removable. Don’t disconnect ducts or connections behind the housing.
- Rinse the parts using the water and method permitted. If there is dried detergent or gelled fabric softener, soften it and remove it gradually as directed in the manual; use a soft brush if permitted.
- Clean the visible recess with a slightly damp cloth. Don’t insert tools into water outlets or wet internal areas.
- Rinse, dry and reinstall the inserts in their original positions. Slide the drawer back in without forcing the rails.
Check the assembly and product flow
Check that the siphon isn’t raised, twisted or out of place. Don’t change its position in an attempt to empty a compartment. A small amount of water left behind may be due to the design; compare its behaviour with the manual.
If the problem continues with the parts clean and properly assembled, distinguish between product left in the dispenser and water coming out through the drawer. Cleaning doesn’t confirm a pressure or valve fault. For widespread dark film in the housing, see contamination in damp areas.
Keep the original inserts and don’t swap parts between similar-looking compartments. They must be seated correctly for proper dispensing and draining.
View all articles in Which Washing Machine Components to Clean and How to Identify Them
