The inlet screens are part of the water supply. To clean them, turn off the water and check whether the manufacturer allows them to be removed; do not pierce them or remove them permanently to increase the flow rate.
Locate the correct filter
The manual may show a screen in a hose connection, at the machine inlet or in an assembly with its own access point. Don't confuse it with the drain filter. Also check whether the washing machine has one or several inlets.
LG advises turning off the taps and disconnecting the machine before cleaning inlet filters. The specific removal instructions should not be applied to pressed-in screens or valves of a different design.
Access and cleaning
- Stop the washing machine, isolate the power supply and turn off the relevant water supply taps. Make sure the area around electrical equipment stays dry.
- Prepare to disconnect the hose as instructed in the manual, and have a container ready for any water left in it. If you can't isolate the water or safely reach the connection, ask for help.
- Check the screen and seals. Remove the part only if the manual describes it as removable; don't try to pull it out with a tool.
- Remove sediment using an approved method, without deforming the screen or using needles to clear its holes.
- Refit the filter and seals, then reconnect the hose without cross-threading it. Restore the water supply as instructed in the manual and check for leaks before washing.
If particles build up again
Make a note of whether it started after a water outage or plumbing work, and whether there is sediment elsewhere. Repeatedly cleaning the same screen won't fix the source of the water problem. The water quality pathway helps distinguish dissolved minerals from particles.
See water supply hoses and connections if a connection is damaged. If the screens are clean but the washing machine still won't fill, continue with water inlet troubleshooting, without electrically testing the valve as part of cleaning.
Don't run the washing machine without the screens required by its design. A damaged screen must be replaced with a compatible part and fitted correctly.
View all articles in Which washing machine components to clean and how to identify them
