Washing machine and septic tank: discharge, products and hydraulic load

Washing machine discharge adds water and products to the septic system. The volume and how it is concentrated over time matter, as do the capacity and condition of the installed treatment system.

Discharge must go to the intended system

Connecting to a septic system, diverting greywater and discharging to the ground are different options. None is authorised simply because the water comes from washing. The person responsible for the installation and the relevant authority must confirm the permitted route.

Volume and timing of wash loads

A succession of discharges can increase the hydraulic load over a short time. The EPA recommends spreading washing loads throughout the week to avoid concentrating demands on domestic septic systems. The interval and capacity of your system need to be assessed individually; there is no universally safe number of cycles per day.

To describe the demand, record water per cycle, usual load frequency and other water use that occurs at the same time. A machine that uses less water under equivalent conditions may reduce the hydraulic input, but it will not fix a failing absorption field or treatment system.

Products and system maintenance

Use compatible products and appropriate doses in accordance with the appliance, product label and recommendations of the person responsible for treatment. Do not add substances intended to compensate for hydraulic overloading or change connections to conceal an overflow.

If greywater recovery is being considered, it needs a separate assessment. The drain connection must retain its design, and changes in water use must be checked against actual data.

Give the person responsible for the system data on volumes and frequency; these are more useful than stating only the washing machine's capacity.

View all articles in Installing a washing machine: requirements and checks