The drain hose must be positioned at the height and connected as specified for the model. Pumped drainage and gravity drainage do not necessarily use the same route.
Identify the type of drainage outlet
The outlet may connect to a standpipe, a designated trap connection or a sink. The installation must accommodate the flow rate and temperature of the discharged water and maintain the required protection against backflow. The connection for a portable machine may be temporary and use a different type of securing method.
Details from the manual to follow during installation
- Minimum and maximum height, if specified, and the point from which they are measured.
- Insertion depth and whether an air gap is required.
- Route length and approved extensions.
- Bend radius, support and securing method.
- Accessories and connection type for the building's drain.
The hose must remain secured without being crushed. Sealing a standpipe without checking or inserting the hose too far can interfere with the intended ventilation. Specifications for another brand are no substitute for those of your appliance.
Why it may drain while filling
An incorrectly routed hose can create a continuous siphoning flow. If the outlet relies on gravity, the difference in height plays a different role, and copying a raised route may prevent drainage. The hydraulic circuit can help distinguish between the two designs.
With a shared drain, you should also check capacity and backflow between appliances. If the machine fills and drains at the same time, note what happens and check the connection without assuming the pump is faulty.
Before testing, compare the entire route with the diagram in the manual, including the washing machine's final position.
View all articles in Installing a washing machine: requirements and checks
