Washing machine discharge adds water and products to the septic system. The volume and how it is concentrated over time matter, as do the capacity and condition of the treatment system installed.
The discharge must match the intended system
Connecting to a septic system, diverting greywater and discharging onto the ground are different options. None is permitted simply because the water comes from washing clothes. The person responsible for the installation and the relevant authority must confirm the permitted discharge route.
Load volume and timing
A series of drain cycles can increase hydraulic loading over a short period. The EPA recommends spreading laundry loads throughout the week to avoid concentrating demand on household septic systems. The appropriate interval and capacity for your system require an individual assessment; there is no universally safe number of cycles per day.
To describe the demand, record water per cycle, typical loads and other water use that occurs at the same time. A machine that uses less water under equivalent conditions may reduce the hydraulic input, but it will not fix a failing leaching field or treatment system.
Products and system maintenance
Use compatible products and appropriate amounts according to the appliance, product label and recommendations from the person responsible for treatment. Do not add substances intended to compensate for hydraulic overloading or alter connections to conceal an overflow.
If greywater recovery is being considered, it requires a separate assessment. The drain connection must retain its intended design, and changes in water use must be checked against actual data.
Give the person responsible for the system data on volumes and frequency; this is more useful than providing only the washing machine's capacity.
View all articles in Washing machine installation: requirements and checks
