Water used includes the fills and rinses in the programme, as well as any adjustments made by the controls. There is no single figure that applies to all washing machines of the same type.
What affects the amount
The programme, load size and absorbency, rinse options, selected water level where available, and automatic adjustments all play a part. An adjustment for excess suds or an unbalanced load can also change the total. The term HE is no substitute for measured data.
How to compare or measure
Use figures from the same test, or record a cycle with the load and options noted. To take a household reading from the water meter, avoid using other water during the measurement and bear in mind that leaks or shared use make it impossible to attribute the reading to the appliance. Do not open pipes or dismantle meters.
Litres per kilogram = litres per cycle ÷ dry load weight. As an illustrative example, 48 litres for 6 kg is 8 L/kg; the same 48 litres for 3 kg is 16 L/kg. This does not mean that every programme uses the same amount of water with a half load.
If the figure is in gallons, identify which system is used: a US gallon is approximately 3.785 litres and an imperial gallon is 4.546 litres. Regional labels may use different comparison bases.
Cost and what the figure covers
Convert litres to cubic metres by dividing by 1,000, then apply the relevant local variable water supply and sewerage rates. Hypothetical example: 50 litres and a combined rate of 3 currency units/m³ come to 0.15 currency units, excluding fixed charges.
Some washer-dryers use extra water during drying. A sudden increase may also need to be investigated; it should not be explained away as normal adjustments or addressed through improvised reuse.
Compare total water use for the same washing needs, with the result and dry load weight recorded.
View all articles in Washing machine efficiency: electricity, water and sustainability
