The washing machine fills and drains at the same time

If water drains away while the washing machine is trying to fill, check how your model drains and how the hose is installed. Siphoning can occur without the pump driving the water out.

Is the water draining away by itself, or is the pump running?

Note whether you can hear the pump running and whether the control panel displays a warning. The sound helps describe what happened, but does not on its own confirm which component is operating. If continuous pumping is confirmed, follow the diagnosis for a pump that won't stop.

On a gravity-drained machine, check that the drain selector has not been left open. Its installation is different from that of an automatic machine designed to pump water out.

Check the outlet against the manual

The height of the drain outlet, how far the hose is inserted, and whether air can enter connections where required can all affect unintended draining. Whirlpool documents this issue in its explanation of siphoning during filling; its measurements apply to the appliances described, not to all washing machines.

Do not seal with tape a connection that needs to admit air, or improvise a raised hose position. Compare the installation with the guide to drain height, securing and siphoning and the model documentation.

If the installation is correct and the controls continue to alternate between filling and draining, the water-level system and any activated safety devices should be checked. Do not keep repeating the fill cycle indefinitely.

Distinguish this from water flowing back in after the cycle has finished: filling and draining at the same time call for a different diagnostic approach.

View all articles in Filling, water-level and drainage problems