If water drains away while the washing machine is trying to fill, check how your model drains and how the hose is installed. Siphoning can occur without the pump driving the water out.
Is the water draining away by itself, or is the pump running?
Note whether you can hear the pump running and whether the panel displays a warning. The sound helps describe what is happening, but does not by itself confirm which component is operating. If you can confirm that the pump is running continuously, follow the diagnosis for a pump that will not stop.
On a gravity-drain machine, check that the drain selector has not been left open. Its installation is different from that of an automatic machine designed to lift water using a pump.
Check the outlet against your manual
The height of the drain point, how far the hose is inserted, and air entering connections where this is required can affect unintended draining. Whirlpool documents this issue in its explanation of siphoning during filling; its recommendations apply to the machines described, not to all washing machines.
Do not seal a connection that requires air to enter with tape, or improvise a raised hose position. Check the installation against the guide to drain hose height, securing and siphoning and the model documentation.
If the installation is correct and the controls continue switching between filling and draining, the level system and any activated safety feature should be checked. Do not keep repeating the fill cycle indefinitely.
Distinguish this from water flowing back in after the cycle ends: when filling and draining happen at the same time, the diagnostic path is different.
View all articles in Problems with filling, water level and drainage
