The spin tub on a semi-automatic washer isn’t spinning

If only the spin tub has stopped working, check its lid, timer control, load distribution and drainage. The wash function may still work because it uses a separate mechanism.

Check the spin cycle setup

Stop the machine and unplug it before rearranging the clothes. Check that no items are hanging outside the basket, and fit the inner lid if your model requires one. Close the outer lid properly and use the control as directed in the manual.

Make sure the water can drain away. If water is still trapped, check the semi-automatic washer’s drainage before assuming the motor is at fault.

What to note about its behaviour

  • Nothing happens when you turn the timer.
  • You hear a humming sound, but the basket doesn’t start moving.
  • It starts weakly or stops with a permitted load.
  • There’s rubbing, or signs that an item is outside the basket.

The brake, drive system, the capacitor, if fitted and the motor need to be checked individually. A humming sound doesn’t confirm which one has failed.

If it doesn’t stop as it should

A basket that doesn’t brake as expected when the lid is opened is a safety issue. Stop using the machine and arrange for it to be checked. Don’t bypass the lid switch to help it start, or put your hand near a moving basket.

Don’t try to turn the basket by hand while the machine is plugged in; it must start with its safety devices operating.

View all articles in Faults with semi-automatic and twin-tub washing machines