In a semi-automatic washer, pauses and changes of direction depend on the timer and the washer’s design. A lack of movement or a new imbalance should be compared with that sequence, not with another washing machine.
Check the load and visible condition
With the machine stopped and unplugged, check whether a garment or object is blocking the accessible area around the pulsator. Don’t lever under the pulsator or force it to free it. Follow the recommended load and water level for the wash.
If the timer control has stopped advancing or isn’t transmitting the selection, note what’s happening without turning it beyond its limits.
What the inspection can tell you
Note whether it doesn’t operate in either direction, whether the speed changes, or whether it only fails after a certain amount of time. Operation in just one direction can be related to different components; it doesn’t automatically mean the capacitor has failed.
The pulsator and its mounting must transmit the movement received from the shaft. If the movement isn’t getting through, the belt (if fitted), the motor and the timer will need to be assessed against the wiring diagram.
Limits of at-home checks
Don’t observe the motor with a panel removed while power is connected, or swap wires to reverse its direction. A competent person with the appropriate documentation should compare the contacts and operation.
Describe whether the fault affects the direction, the start-up or the strength of movement; these are different details, even if the clothes aren’t getting washed.
View all articles in Faults with semi-automatic and twin-tub washing machines
