First, distinguish between a door that won’t fit properly and one that closes but isn’t recognised by the control. A mechanical click doesn’t confirm that the electrical safety interlock is working.
If it doesn’t fit properly
With the machine stopped and isolated from power, remove any laundry obstructing the closing area. Check the latch, handle, hinge and housing without inserting tools. A sagging door or broken part needs the mechanism repaired; don’t push harder.
If the hinge or handle has visible play, don’t adjust the catch to hide it. Don’t prop a weighted lid open with tape either.
If it fits but the program won’t start
Check which indicator is displayed and at what stage that model locks. Some lids don’t lock immediately when switched on. Check the start command and the program’s start conditions in the manual.
If the door warning remains when the door is correctly aligned, diagnosis should distinguish between the latch, wiring, safety interlock and control. An intermittent contact can’t be identified by the sound of the mechanism alone.
What not to use as a test
Don’t bridge terminals, bring magnets near sensors to fool them, or hold the latch manually during a cycle. Functional testing must be done with the appliance assembled and its protective covers restored, using the specified procedure.
Tell the service technician whether it “won’t fit” or “fits but shows the door-open warning”; don’t replace the lock before checking the alignment.
View all articles in Washer door, lid and safety lock problems
