EF0/EFO on AEG machines may be related to foam, a leak or an imbalance. In the documentation consulted, EF3 indicates leak detection: first check whether water is escaping.
Visible water: stop the test
The manufacturer’s documentation distinguishes several conditions within this error family. If there is a leak, turn off the tap and stop using the machine. Disconnect it only if you can do so safely and the area is dry; do not touch plugs surrounded by water.
Check whether the leak is coming from the drawer, seal, filter or hose. From the outside, check for clothes caught in the seal and any connections that have recently been handled. Do not tilt the appliance to remove water from its base.
No leak? Check for foam and load distribution
If there is a lot of foam in the drum, check the detergent dose, concentration and additives. Let it subside in accordance with the manual’s procedure, without using home remedies. A drawer with residue may need cleaning using the user-accessible parts.
If the main issue is an imbalance, wait for the door to unlock normally and redistribute the load within the programme’s capacity. Do not automatically assume EF0 means too much detergent if there is another indication.
If the warning appears again, record the PNC and the circumstances. The AEG warning index distinguishes the related error families; a persistent or inaccessible leak requires servicing.
The message disappearing does not mean it is safe to continue if water is still escaping.
View all articles in AEG washing machine error codes and warnings
