Error E60 in AEG washing machines: heating fault family

E60 and the E61, E62 and E69 subcodes cited by AEG relate to heating faults. The warning requires diagnosis if it returns after the permitted reset.

Don’t confuse the selected temperature with a displayed error

The manufacturer’s documentation groups these codes together without instructing you to replace the heating element. A programme that limits the temperature or adjusts its duration does not indicate a fault unless a corresponding message appears.

Record the full code, programme and stage. For a washer-dryer, note whether it occurred during washing or drying; the active function helps describe the issue. Don’t check the heating by touching internal parts or bridging sensors.

Resetting before seeking assistance

AEG support recommends disconnecting the appliance from the power supply for about one minute, then reconnecting it. Confirm the procedure for your PNC and only do this from a dry, safe location, with no visible electrical damage.

If the code returns, stop trying to reset it and request service. Switching to a cold programme to keep using the appliance doesn’t confirm that the fault has been resolved. The guide to electrical and heating faults can help you record related symptoms without diagnosing a part based on the code.

Give the exact subcode; summarising E61 or E69 as E60 may lose useful information.

View all articles in AEG washing machine error codes and warnings