Error E20, E21 or C2 in AEG washing machines: not draining

E20, E21 and C2 on AEG machines are part of the drainage fault family; the documented models may also emit two beeps or flashes.

Check the installation and drain outlet first

The manufacturer's documentation includes E22, E23 and E24 among the related alerts. Keep the subcode: grouping them when checking the drain does not identify a faulty part for each one.

Check the hose route, how far it extends into the outlet and its height against the diagram in the manual. If it connects under a sink, check for a blockage or backflow in the household drain. Check for excess suds if water is being retained.

Accessible filter with controlled draining

If your PNC has a user-accessible filter, stop and safely disconnect the appliance, let the water cool and prepare a container. Drain the water using the specified method before removing the cap completely. Clean only accessible debris and refit the seal so it is watertight.

The drain filter cleaning guide provides more information about preparation. If there is no intended access point or water remains after checking the drain route, request assistance. A humming sound does not prove that the flow rate is correct or confirm that the pump is faulty.

Do not force the door open to remove clothes while the drum contains an unsafe level of water.

View all articles in AEG washing machine error codes and warnings