Whirlpool washing machine error codes and alerts

Whirlpool washing machine error codes and alerts

Whirlpool washing machines can display numeric codes and usage alerts. This index distinguishes front-load and HE top-load models from the ranges documented in North America.

Front door, top lid and dispensing

In Whirlpool’s North American support information, F5 E2 refers to the front door lock, while LdL and LdU describe lid-related situations on HE top-load models. LOC or LC relates to the control lock: it does not mean the door lock is jammed.

The messages dET and F8 E2 affect the dispenser, but require different checks: recognising a cartridge is not the same as checking for residue in the system.

Choose the check based on when it occurs in the cycle

  • If it takes a long time to fill, see F8 E1, LF and Lo FL and check which water inlets the model needs.
  • If it retains water, distinguish F9 E1 from drn according to the load type.
  • If excess suds prolong the rinse cycles, Sud or Sd points to the detergent and dose.
  • An unbalanced load corresponds to Ofb; an excessive load, to OL.

Messages that may accompany normal operation

The official front-load table includes Int during cycle interruptions and rL/F34 when it detects clothes in the clean washer cycle. In the latter case, remove the clothes before maintenance. On compatible top-load models, PF indicates a power interruption. The steps for continuing depend on the control panel.

Keep the full model number, code and load type handy before choosing a procedure. These correspondences are not a guide for every European Whirlpool model or every appliance with the same logo.

Frequently Asked Questions

Where can I find the full model number of my Whirlpool washing machine?

Check the appliance identification plate and your purchase documents. Its location varies by design; look in the manual for the model and serial number section rather than removing panels to find it.

Does the same code mean the same thing on all Whirlpool washing machines?

No. Whirlpool uses different platforms. This index draws on North American support information for front-load and HE top-load models; a model from another market needs its own manual.

How can I tell a normal alert from a fault?

Read the full message: LOC/LC indicates that the controls are locked, while F5 E2 relates to the front door lock. It also matters whether the appliance is following an expected routine or repeatedly stopping the wash.

Does clearing the code confirm that the problem is fixed?

No. A reset may clear the display without fixing a water restriction, an improperly closed door or a leak. Check the result of the permitted correction, and do not repeat cycles if there are any signs of risk.

What information should I give the service technician?

Provide the model and serial numbers, the full message, load type, cycle stage, and whether water or clothes are stuck inside. Mention any recent changes to the installation, detergent or load, and which checks you carried out.

An external adjustment may resolve an operating condition. If the same alert returns with the correct installation and load, keep a record and contact support.