The inlet screens are part of the water supply. To clean them, shut off the water and check whether the manufacturer allows them to be removed; do not pierce them or remove them permanently to increase the flow rate.
Locate the correct filter
The manual may show a screen in a hose connection, at the machine’s inlet, or in an assembly with its own access point. Do not confuse it with the drain filter. Also check whether the washing machine has one or several inlets.
LG advises shutting off the taps and disconnecting the appliance before cleaning inlet filters. Do not apply its specific removal instructions to pressed-in screens or valves of a different design.
Access and cleaning
- Stop the washing machine, isolate its power supply and close the relevant water supply taps. Make sure the surrounding area stays dry.
- Follow the manual’s instructions for disconnecting the hose, and keep a container ready for any water left in it. If you cannot shut off the water or reach the connection safely, ask for help.
- Check the screen and seals. Remove the part only if the manual describes it as removable; do not try to prise it out with a tool.
- Remove sediment using an approved method, without deforming the screen or using needles to open its holes.
- Refit the filter and seals, and reconnect without cross-threading the connection. Restore the water supply as directed in the manual and check for leaks before washing.
If it fills with particles again
Note whether this started after a water supply interruption or plumbing work, and whether there is sediment at other outlets. Repeatedly cleaning the same screen will not fix the source of the water problem. The water quality guide helps distinguish dissolved minerals from particles.
Check water supply hoses and connections if a connection is damaged. If the screens are clean but the washing machine still does not fill, continue with water inlet troubleshooting, without electrically testing the valve as part of cleaning.
Do not run the washing machine without the screens required by its design. A damaged screen must be replaced with a compatible part and fitted correctly.
View all articles in Which Washing Machine Components to Clean and How to Identify Them
