Clean the drain or pump filter

Open the drain filter only if the manual allows maintenance access, and only after managing the water trapped inside. Let the appliance cool down and isolate the power supply before removing the cap.

Before turning the filter

Locate the access point in the manual. Not all machines have a front cover or a removable filter. If water remains in the drum, first follow the model’s emergency drain procedure; opening the filter suddenly can release the water onto the floor.

Keep a shallow container and cloths ready. The LG guide to the pump filter recommends draining the water first, before removing the filter, and warns that water may still flow out when it is opened. Water from a hot cycle must be allowed to cool before handling.

Cleaning the accessible assembly

  1. With the washing machine empty, stopped and disconnected from the power supply, drain any remaining water as directed for its design.
  2. Release the filter using the documented opening method. If it is stuck, do not use a lever or apply more force.
  3. Remove visible objects and fibres from the filter. Wash it using the approved method, without deforming its mesh or structure.
  4. Clean the accessible seating surface and inspect the seal. Do not put fingers or tools into the pump mechanism.
  5. Reinstall the filter, drain cap and fasteners exactly as specified in the manual. If the filter is fitted at an angle or lint is caught in the seal, it may leak.

Checking after reassembly

Once everything is closed, restore the power supply and carry out the check recommended by the manufacturer, keeping an eye on the area you worked on. If you see any drips, stop using the machine and check the assembly only after isolating the machine and managing the water; do not tighten anything while it is running.

If the drainage fault persists, the dirt removed does not confirm or rule out a pump fault. For filtering fibres inside the drum, refer to the lint catcher, which is a different part.

A cap that will not open or seal properly needs to be inspected. The condition of the filter alone is not a reason to replace the pump.

View all articles in Which Washing Machine Components to Clean and How to Identify Them