The agitator or impeller can usually be cleaned on its visible surfaces without removing it. Remove a lid, dispenser or assembly only if the manual expressly includes that procedure for users.
A removable cap does not mean the agitator can be removed
Check whether the manual distinguishes between the body, cap and dispenser. A screwed connection may secure the mechanism and may not be intended for household cleaning. Whirlpool advises against removing the agitator without specific instructions and warns that not all its caps can be removed.
Cleaning accessible areas
- Empty the tub and, with the machine switched off and disconnected from the power supply before working by hand, inspect the agitator body or the surface of the plate.
- Remove debris and gently clean accessible areas using a compatible method. Do not push a cloth under the base or insert a brush into enclosed gaps.
- If there is a removable cap or dispenser, release it as directed in the manual and clean that part outside the assembly.
- Put the parts back in place before running an approved tub-clean cycle.
- When you finish, check whether any deposits remain on the visible surfaces.
When the dirt seems to be underneath
A smell or debris coming from an edge does not prove that the pulsator needs to be removed. Note where the residue appears and whether it decreases after the recommended maintenance. If it remains in an inaccessible area, check how that model is serviced.
Do not use videos of a similar machine to decide that simply loosening a screw will do. The fixing and assembly may differ, even if both machines have a circular plate.
Include this task in top-load washer cleaning. Drum and tub cleaning takes care of the wash area without turning an inspection into the removal of mechanisms.
Cleaning stops at the access limit specified in the manual. For fixed parts with persistent deposits, request an assessment before disassembly.
View all articles in Which Washing Machine Components to Clean and How to Identify Them
