Cleaning the washing machine’s water inlet screens

The inlet screens are part of the water supply. To clean them, turn off the water and check whether the manufacturer allows them to be removed; do not puncture them or remove them permanently to increase the flow rate.

Locate the correct filter

The manual may show a screen in a hose connection, at the machine inlet or in an assembly with its own access point. Do not confuse it with the drain filter. Also check whether the washing machine has one or more inlets.

LG advises turning off the taps and unplugging the appliance before cleaning inlet filters. The specific removal method should not be used for press-fitted screens or valves of a different design.

Access and cleaning

  1. Stop the washing machine, isolate the power supply and turn off the relevant water supply taps. Make sure the surrounding area stays dry.
  2. Prepare to disconnect the hose as described in the manual, and have a container ready for any water left in it. If you cannot isolate the water or reach the connection safely, ask for help.
  3. Check the screen and seals. Remove the part only if it is described as removable; do not try to pull it out with a tool on guesswork.
  4. Remove sediment using an approved method, without deforming the screen or using needles to clear its holes.
  5. Refit the filter and seals, then reconnect without cross-threading the connection. Restore the water supply as instructed in the manual and check for leaks before washing.

If it fills with particles again

Make a note of whether this started after an interruption or plumbing work, and whether there is sediment elsewhere. Repeatedly cleaning the same screen will not address the source of the water. The water quality pathway can help distinguish dissolved minerals from particles.

See water supply hoses and connections for a deteriorated connection. If the screens are clean but the washing machine still does not fill, continue with water inlet troubleshooting, without electrically testing the valve as part of the cleaning process.

Do not run the washing machine without the screens required by its design. A damaged screen must be replaced with a compatible part and fitted correctly.

View all articles in Which washing machine components to clean and how to identify them