Cleaning the washer’s water inlet screens

The inlet screens are part of the water supply. To clean them, shut off the water and check whether the manufacturer allows them to be removed; do not puncture them or remove them permanently to increase water flow.

Find the correct filter

The manual may show a screen in a hose connection, at the machine inlet, or in an assembly with its own access point. Don’t confuse it with the drain filter. Also check whether the washer has one or more inlets.

LG recommends shutting off the taps and unplugging the appliance before cleaning inlet filters. The specific removal instructions should not be applied to pressed-in screens or valves of a different design.

Access and cleaning

  1. Stop the washer, isolate the power supply and close the relevant water supply valves. Make sure the area around electrical components stays dry.
  2. Prepare to disconnect the hose as directed in the manual, and place a container underneath to catch any water left in it. If you can’t shut off the water or reach the connection safely, ask for help.
  3. Inspect the screen and seals. Remove the screen only if the manual describes it as removable; don’t try to pry it out with a tool.
  4. Remove sediment using an approved method, without deforming the screen or using needles to clear its openings.
  5. Reinstall the filter and seals, then reconnect the hose without cross-threading it. Restore the water supply as directed in the manual, and check for leaks before running a wash.

If particles build up again

Note whether this started after a water interruption or plumbing work, and whether there is sediment at other fixtures. Repeatedly cleaning the same screen won’t fix the source of the particles in the water. The water quality pathway can help distinguish dissolved minerals from particles.

See water supply hoses and connections for a damaged connection. If the screens are clean and the washer still won’t fill, continue with water inlet troubleshooting, without electrically testing the valve as part of cleaning.

Do not run the washer without the screens required by its design. A damaged screen must be replaced with a compatible part and installed correctly.

View all articles in Which Washing Machine Components to Clean and How to Identify Them