Clean lint, filters and accessible areas of a washer-dryer

In a washer-dryer, clean the air circuit only through the access points provided. Check the cleaning method for each filter: a mesh, foam and heat exchanger may not all be suitable for the same treatment.

Air filter and drain filter

The first catches lint from the drying path; the second is part of the water drainage system. Before opening a cover, check the manual to identify which filter the warning refers to. For the pump, use the drain cleaning procedure.

Removal and refitting according to material

  1. Let the programme finish and the appliance cool down. Prepare for cleaning and isolate the power supply as specified for the access point.
  2. Remove the approved assembly without forcing its guides. Collect any visible lint before washing.
  3. Separate the parts only if the manual permits it. Wash only the parts that are suitable for washing, and follow the specified drying requirements.
  4. Check the mesh and foam for tears or deformation. Do not modify the filter or add layers.
  5. Refit each part in its housing before using the drying function again.

Drying requirements are not universal: GE allows a specific UltraFast Combo foam filter to be refitted while damp, whereas its instructions for wet-cleaning the mesh include drying it. This distinction means you must identify the part and model variant; it does not authorise you to fit other filters while wet.

Heat exchanger and housing

Clean only what the manual says is accessible. In the advanced cleaning procedure for the GE UltraFast Combo housing, the manufacturer says to avoid damaging the fins. Do not take this specific access point as permission to open ducts or casings on another washer-dryer.

Water-condensing washer-dryers may not have a heat exchanger that users can remove. They may have a different routine for flushing out fibres. Follow the instructions for your model, even if they differ from those for a standalone tumble dryer.

If the warning persists with the correct filters fitted properly, note the message and contact support. Include this task in the washer-dryer washing maintenance.

View all articles in Which Washing Machine Components to Clean and How to Identify Them