How much water does a washing machine use, and how to interpret its consumption

Water used includes the fills and rinses in the programme, as well as any adjustments made by the control system. There is no single volume that applies to all washing machines of the same type.

What affects the amount

The programme, load weight and absorbency, rinse options, selected water level where available, and automatic adjustments all play a part. An adjustment due to suds or an unbalanced load can also change the total. The designation HE is not a substitute for measured data.

How to compare or measure

Use data from the same test, or record a cycle with the load and options noted. To take a reading from your household water meter, avoid using water elsewhere during the measurement and bear in mind that leaks or shared usage make it impossible to attribute the reading to the appliance. Do not open pipes or dismantle meters.

Litres per kilogram = litres used in the cycle ÷ dry load weight. As an illustrative example, 48 litres for 6 kg works out to 8 L/kg; the same 48 litres for 3 kg works out to 16 L/kg. This does not mean that every programme uses the same amount of water with a half load.

If the figure is given in gallons, identify the system: one US gallon is approximately 3.785 litres and one imperial gallon is 4.546 litres. Regional labels may use different comparison bases.

Cost and scope of the figure

Convert litres to cubic metres by dividing by 1,000, then apply the relevant local variable rate for water supply and sewerage. Hypothetical example: 50 litres at a combined rate of 3 monetary units/m³ comes to 0.15 monetary units, excluding fixed charges.

Some washer-dryers use additional water during drying. A sudden increase may also need investigation; it should not be explained away as a normal adjustment or addressed through improvised reuse.

Compare the total water used for the same washing requirement, with the result and dry load weight recorded.

View all articles in Washing machine efficiency: electricity, water and sustainability