How to assess and replace the door seal

The seal should be assessed for replacement if it has cuts, deformation or wear that affects its ability to seal. A stain or removable dirt does not, by itself, mean that the door seal is unusable.

Relate the damage to the leak

Locate the leak from the door and check whether it matches a cut, trapped clothing or rubbing. If the drum is off-centre or loose, correct the cause to avoid damaging the new seal.

A mark that keeps appearing in the same place may point to mechanical contact. Do not attribute all wear to the cleaning product without checking the position and any objects present.

How door seals differ

Drain holes, auxiliary openings, seating profiles and clamps depend on the model. Use the parts diagram reference; a seal of a similar diameter may leave an opening in the wrong place.

What replacing it involves

Preparation includes disconnecting the machine, turning off the water supply, draining any remaining water and documenting access. On some machines, the door seal can be released through the opening; others require the front panel to be removed. Do not assume that a video of another machine shows the correct way to access it.

The seal must be installed in the correct orientation and seated properly, with its retaining parts in place; avoid pinching or twisting it. Once the protective covers have been put back, check that the door closes, the drum turns without rubbing and the machine is watertight.

Adhesives are not a standard fix for a tear. If any edges catch clothing, the damage to the fabrics should also be investigated.

A new seal will not make up for a sagging door or a drum that rubs against it; the cause of the contact must be corrected.

View all articles in Diagnosing and repairing washing machine components