A visible leak underneath the washing machine does not directly identify the pump, drum or hose as the source. First, check whether the water is coming from the front, an external connection or a filter that was recently opened.
Relate the leak to the stage of the cycle
Stop the machine and turn off the water supply if it is actively leaking. Isolate the power from a dry spot; do not kneel in the puddle or put your hand under a plugged-in machine.
| When it appeared | What to note |
|---|---|
| While filling | Whether the dispenser drawer, an inlet or the front gets wet first |
| While the machine is running | Whether it coincides with the water level, load, foam or rubbing |
| While draining | Whether an external pipe overflows or water appears near the pump access |
| After cleaning the filter | How the cap was fitted and whether the drip starts around its edge |
What you can check from the outside
Without moving or tilting the machine, look for water marks running down from the door or dispenser drawer. If the source is the filter cap, follow its specific checking procedure after draining the machine safely.
When the source is not visible, inspect the hoses, pump assembly and other seals, based on the leak's identified path. A leak associated with the drum supports may require the bearings and seal to be assessed.
Dark liquid may have mixed with dirt from the floor or the machine. Its colour alone does not confirm a damaged gearbox.
Note when the leak occurred and the first place where you noticed moisture; do not remove panels to reproduce a leak while the machine is connected to the water supply.
View all articles in Water leaks in the washing machine: find the source
