The absence of a jet indicates a possible recirculation fault only if the model has that circuit and should activate it at that stage. Visible water may also come directly from the inlet.
Identify where the water should come from
Recirculation returns water from the tub to the wash circuit. It is different from bringing in fresh water and draining water away. The explanation of the recirculation circuit helps locate these functions.
Not all washing machines use a second pump or maintain a continuous jet. Check the manual to see which programmes and conditions use it before interpreting its absence.
Follow the documented route
- Confirm the programme, stage and conditions required to activate the function.
- Check only the accessible cleaning points approved for this purpose.
- Investigate blockages or damage to the ducts in the circuit.
- Check the pump, connections and control sequence using the technical procedure.
The operation of the drain pump does not prove that the circulation pump is working properly. Nor does a noise confirm that water is flowing along the expected route.
When replacement is appropriate
Internal repairs require safe isolation, water containment, and exact identification of the pump and connections. Seals, clamps and routing must be restored, and watertightness and circulation validated with the appliance assembled.
Compatibility is not determined by appearance: a drain pump and a circulation pump are not interchangeable without documented equivalence.
Tell us which programme was running and which outlet you expected to see water from; this observation helps first establish whether a recirculation command was active.
View all articles in Diagnosing and repairing washing machine components
