EF0/EFO on AEG machines may be related to foam, a leak or an imbalance. EF3 indicates leak detection in the documentation consulted: first check whether water is escaping.
Visible water: stop the test
The manufacturer’s documentation distinguishes several conditions within this error family. If there is a leak, turn off the tap and stop using the machine. Disconnect it only if you can do so safely with dry hands and in a dry area; don’t touch plugs surrounded by water.
Check whether the water is coming from the detergent drawer, seal, filter or hose. From the outside, check for clothing caught in the seal and for connections that were recently handled. Don’t tilt the appliance to remove water from its base.
No leak? Check the foam and load distribution
If there is a lot of foam in the drum, check the amount and concentration of detergent and any additives. Let the foam subside according to the manual’s instructions, without trying home remedies. The detergent drawer may need cleaning if it has residue; this is a user-accessible area.
If the main issue is an imbalance, wait for the door to unlock normally and redistribute the load within the programme’s capacity. Don’t automatically assume EF0 means too much detergent when there are other signs.
If the warning returns, note the PNC and the conditions. The AEG warning index distinguishes the related error families; a persistent leak or one that cannot be accessed requires service.
The message disappearing does not mean you can continue if water is still leaking.
View all articles in AEG washing machine error codes and warnings
