Suspension, counterweights and balancing: how a washing machine is stabilised

The suspension supports the tub assembly and limits how its movement is transferred to the cabinet. Electronic load redistribution aims to improve the distribution of the load; these are different mechanisms.

What each component does

Stability functions, depending on the design
ComponentRole
Springs or rodsSupport the assembly and allow the intended movement
Shock absorbersDissipate some of the energy from the movement
CounterweightsProvide the mass and distribution specified by the design
Balancing ringsContribute to dynamic behaviour in designs that include them
Spin controlRedistribute the load, limit speed or cancel an attempt if the control logic requires it

From imbalance to cabinet movement

A load gathered in one area generates varying forces during spinning. Some of the movement is absorbed within the suspended assembly, while some reaches the support surface. Spin speeds and the floor's response affect what you feel.

The floor must be suitable and the feet must sit firmly. A flexible floor can move even if the cabinet is initially level. Adding weight or a soft base changes the behaviour without proving that it improves it.

Expected movement and damage are different questions

The inner drum and the suspended tub are not the same part. Movement of the assembly does not automatically mean the shaft is loose. If the behaviour has changed or banging occurs, a suspension inspection needs to check the relevant fasteners and components.

Stability comes from the assembly, its controls and its support; none of these should be assessed as though it acts alone.

View all articles in How a washing machine works: systems and components