The suspension supports the tub assembly and limits how its movements are transmitted to the cabinet. Electronic load redistribution attempts to improve the distribution of the load; these are different mechanisms.
What each component does
| Component | Role |
|---|---|
| Springs or rods | Support the assembly and allow the intended movement |
| Shock absorbers | Dissipate some of the energy of the movement |
| Counterweights | Provide the mass and distribution intended by the design |
| Balancing rings | Contribute to dynamic behaviour in designs that include them |
| Spin control | Redistribute the load, limit speed or cancel a spin attempt if the control logic requires it |
From an unbalanced load to cabinet movement
A load concentrated in one area creates varying forces during the spin cycle. Some of the movement is absorbed within the suspended assembly, while some reaches the support. The spin speeds and the floor’s response affect what you feel.
The floor must be suitable, and the feet must be firmly placed. A flexible floor may move even when the cabinet is initially level. Adding weight or a soft base changes how it behaves without proving that the change improves it.
Intended movement and damage are separate questions
The inner drum and the suspended tub are not the same component. Movement of the assembly does not automatically mean the shaft is loose. If its behaviour has changed or knocking sounds occur, a suspension inspection should check the relevant fasteners and components.
Stability comes from the assembly, the controls and the support; none of these should be assessed as if it acted alone.
View all articles in How a washing machine works: systems and components
