The tub contains the water; the drum or inner basket holds the laundry and lets water pass through its perforations. Depending on the design, the shaft, support and bearings hold the moving assembly in place.
Two containers with different jobs
In a system with an outer tub and an inner drum, the watertight container holds the wash water. The perforated drum exchanges water with it and moves the laundry. During the spin cycle, some of the water passes through the perforations and drains away through the lower circuit.
In a horizontal-axis machine, the paddles lift garments as the drum turns. In a vertical-axis machine, the basket and agitator or impeller work together, depending on the design; the shape of the support cannot be inferred from the name drum or basket.
How the rotating assembly is supported
The shaft connects the moving assembly to its drive. A support or spider may connect it to the drum, while the bearings allow it to rotate and the seals keep water away from areas that need to remain protected. Not all parts are available as separate replacement parts.
The suspension of the tub has a different function: it allows and limits movement of the assembly relative to the casing. A suspended tub can move without there being abnormal play between the drum and its support.
Materials and repairability
Steel and polymers may be used in different containers. Chemical resistance, geometry, joints and operating conditions matter more than claiming that one material is always superior.
A tub may be designed to come apart or be factory-sealed; whether it can be repaired depends on the parts breakdown. You should not assume that it can be opened by cutting it, or that a particular material determines a specific service life.
Always distinguish what is moving: the drum inside the tub, or the entire assembly relative to the casing.
View all articles in How a washing machine works: systems and components
