Water use includes the water taken in for the programme’s fills and rinses, as well as any adjustments made by the control system. There is no single figure that applies to all washing machines of the same type.
What affects the amount
The programme, load size and absorbency, rinse options, selected water level where available, and automatic adjustments all play a part. Adjustments for foam or an unbalanced load can also affect the total. The designation HE is no substitute for a measured figure.
How to compare or measure
Use figures from the same test, or record a cycle with the load and options noted. For a household reading from the water meter, avoid using water for anything else during the measurement and bear in mind that leaks or shared use make it impossible to attribute the reading to the appliance. Do not open pipes or dismantle meters.
Litres per kilogram = litres per cycle ÷ dry load weight. As an illustrative example, 48 litres for 6 kg equals 8 L/kg; the same 48 litres for 3 kg equals 16 L/kg. This does not mean that every programme uses the same amount of water for a half load.
If the figure is in gallons, check which system is being used: a US gallon is approximately 3.785 litres and an imperial gallon is 4.546 litres. Regional labels may use different bases for comparison.
Cost and scope of the figure
Convert litres to cubic metres by dividing by 1,000, then apply the relevant local variable water supply and wastewater charges. Hypothetical example: 50 litres and a combined tariff of 3 currency units/m³ amount to 0.15 currency units, excluding fixed charges.
Some washer-dryers use additional water when drying. A sudden increase may also need investigating; it should not be explained away as normal adjustments or addressed through makeshift water reuse.
Compare total water use for the same washing needs, with the result and dry load weight recorded.
View all articles in Washing machine efficiency: electricity, water and sustainability
