Excessive foam in the washing machine: what to do and how to prevent it

If there is excessive foam, do not add detergent or anti-foam products. Check whether the appliance is running a scheduled programme; if water is escaping or there is a risk of electric shock, prioritise shutting it down safely.

Foam contained and cycle in progress

Check the full message on the display. Some appliances add extra rinses or limit the spin cycle to manage foam. Whirlpool documents this behaviour in its front-loading machines; the warnings and instructions in its manuals should not be applied to another machine.

Allow the recovery cycle to finish if the manual says to do so. If it calls for an intervention, follow the steps given. Do not force the door open, open the filter during the cycle or add vinegar, oil or improvised defoamer.

Overflow or water outside the appliance

If you can stop it using a dry control without exposing yourself to water, do so. Do not touch wet plugs or connections. If you cannot safely isolate the appliance, keep your distance and seek help. If water is coming out of the dispenser, check water escaping from the detergent drawer, not just the detergent dose.

Work out the dose

  • Identify the product and its concentration, including whether it is suitable for HE or low-foam washing machines.
  • Include any additives or pre-treatment products applied to the laundry.
  • Check whether automatic dosing was still active as well as a manual dose.
  • Compare the amount used with the load size and the instructions on the packaging.

When the cycle has finished, check whether the laundry needs the rinse recommended by the manufacturer. To prevent a recurrence, correct the dosing issue you identified, without arbitrarily reducing the dose so much that the load is left unwashed.

Before your next load of laundry, identify what caused the excessive or unsuitable dose so you can avoid a repeat incident.

View all articles in Laundry detergents, dosing and additives