How to inspect and replace washing machine hoses and internal hoses

An inlet hose, a drain hose and an internal hose are not interchangeable. Any replacement must match the circuit, its connections and the model’s sealing components.

What to look for in a damaged hose

With the appliance disconnected from the power supply and the water turned off, an external inspection may reveal cracks, scuffing, bulges, crushing or a displaced fitting. A hose that appears dry may still fail only during the operation that uses it.

If water appears beneath the machine with no visible source, follow the leak-finding steps before choosing an internal hose.

Preparing for a replacement

  1. Identify the circuit and the applicable part number, including seals and clips.
  2. Check whether the manufacturer allows users to access this area. Internal hoses may require technical disassembly.
  3. Disconnect the power and water supplies, and carefully drain any contents that may escape when you separate the connection.
  4. Reconnect the hoses without twisting or pulling them, and ensure they do not touch moving parts or edges.
  5. Once fully reassembled, check for leaks and confirm that it works, following the specified procedure.

Don’t patch over the symptom

Undocumented glue, tape or joints may fail under pressure or movement. A clip that is overtightened can also damage the material; it must be positioned and tightened appropriately for that connection.

On gravity-drained appliances, changing the hose route to that of an automatic model may prevent drainage. The required heights and lengths are specific to the installation and cannot be inferred from the new part.

If a hose keeps rubbing against something or becoming deformed, check its route and the strain it is under before simply replacing it again.

View all articles in Washing machine component diagnosis and repair