Cleaning the drain or pump filter

Open the drain filter only if the manual allows maintenance access and after dealing with any retained water. Allow the appliance to cool and isolate the power supply before removing the cap.

Before turning the filter

Locate the access point in the manual. Not all machines have a front cover or a removable filter. If there is still water in the drum, first follow the model’s emergency drainage procedure; opening the filter suddenly can release the water onto the floor.

Have a shallow container and cloths ready. The LG guide to the pump filter says to drain the water first, before removing the filter, and warns that water may still come out when it is opened. Water left after a hot cycle must be allowed to cool before handling.

Cleaning the accessible parts

  1. With the washing machine empty, stopped and disconnected from the power supply, drain any remaining water as instructed for its design.
  2. Release the filter using the documented opening method. If it is stuck, do not use a lever or apply more force.
  3. Remove any visible objects and fibres from the filter. Wash it using the approved method, without deforming its mesh or structure.
  4. Clean the accessible seating surface and inspect the seal. Do not put fingers or tools into the pump mechanism.
  5. Refit the filter, drain cap and fastenings exactly as specified in the manual. If it is fitted at an angle or there is fluff on the seal, it may leak.

Checks after refitting

Once everything is closed, restore the power and carry out the check specified by the manufacturer, watching the area you worked on. If any drops appear, stop using the machine and check the installation only after isolating the appliance and dealing with the water; do not tighten it while the machine is running.

If the drainage fault persists, the dirt you removed neither confirms nor rules out a pump fault. For filtering fibres inside the drum, see the lint filter, which is a different part.

A cap that will not open or seal properly needs to be checked. The condition of the filter alone is not a reason to replace the pump.

View all articles in Which washing machine components to clean and how to identify them