Some systems use water during drying, but any visible build-up should not be assumed to be normal. If the water level rises enough to wet the laundry again, check the water supply and drainage in line with the appliance’s design.
A designed-in water supply does not mean the drum should flood
In water-cooled condensation systems, the water supply helps remove moisture from the air, and the circuit drains away the resulting water. Not all appliances work this way; a heat-pump model may include other functions that also use water.
For example, the LG F4X7*FPY* manual requires the cold-water tap to remain open during its drying cycles. This instruction applies to the documented product range and does not define how all washer-dryers work.
What to record if water collects
- Whether the water appears before drying or increases once the cycle has started.
- Whether you can hear the pump, and whether drainage worked at the end of the wash.
- Whether water continues to enter after the appliance has been stopped.
- Whether there is a warning, water backing up from a pipe, or a visible leak.
A drainage problem can leave water in the circuit. A water inlet that does not shut off needs the valve to be assessed; the drying circuit should be checked if the problem depends on how it manages condensate.
Do not turn off the tap as a routine solution without consulting the manual. If the water level rises uncontrollably, stop using the appliance and safely shut off the water supply to contain the leak.
Do not assume it is normal for the laundry to become soaked again just because the appliance uses water during drying: an abnormal water level needs to be investigated.
View all articles in Washer-dryer not drying properly: system-based diagnosis
