Some systems use water during drying, but any visible build-up should not be assumed to be normal. If the water level rises enough to wet the laundry again, check the water supply and drainage according to the appliance’s design.
A designed water supply is not the same as a flooded drum
In water-cooled condensation systems, the water supply helps remove moisture from the air, and the system drains the resulting water. Not all appliances work this way; a heat pump may include other functions that also use water.
For example, the LG F4X7*FPY* manual requires the cold-water tap to remain open during its drying cycles. That instruction applies to the documented product family and does not define all washer-dryers.
What to note if water builds up
- Whether water appears before drying or increases after the cycle starts.
- Whether you hear the pump and whether drainage worked at the end of the wash.
- Whether water continues to enter after you stop the appliance.
- Whether there is an alert, water backing up from a drain line, or a visible leak.
A drainage problem can leave water in the system. A water supply that does not shut off needs the valve assessed; the drying system should be checked if the problem is related to how it manages condensate.
Do not turn off the tap as a routine fix without checking the manual. If the water level rises uncontrollably, stop using the appliance and safely shut off the water supply to contain the leak.
Do not assume it is normal for the laundry to get soaked again just because the appliance uses water while drying: an abnormal water level needs to be diagnosed.
View all articles in Washer-dryer not drying properly: system-based diagnosis
